Thermal properties of La2Zr2O7 double-layer thermal barrier coatings
نویسندگان
چکیده
منابع مشابه
Thermophysical properties of thermal barrier coatings
Thin layers of thermal barrier coating (TBCs) are applied to metallic components of heat engines to reduce metal temperatures and to provide environmental protection. This results in increased engine efficiency and prolonged operational life. Of special current interest is the use of TBCs in aircraft engines. The TBCs, often yttria-stabilized zirconia (YSZ), are deposited on nickel or cobalt-ba...
متن کاملAN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS
In the present study NiCrAlY bond coating layer was produced by electroplating against common atmospheric plasma spraying (APS). Both types of the bond coats were applied on IN738LC base metal then, the YSZ (ZrO2-8% Y2O3) thermal barrier top layer was coated by atmospheric plasma spray technique. Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come ...
متن کاملMicrostructural investigations of EBPVD thermal barrier coatings
This paper deals with the morphology, constitutive phases and fine microstructures of some EBPVD processed yttria partially stabilized zirconia thermal barrier coatings. This study has been performed by X-ray diffraction and scanning and transmission electron microscopy. It was shown that the coatings studied were constituted of a single metastable tetragonal t' phase, as expected if one refers...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملMicrowave Drilling of Ceramic Thermal-Barrier Coatings
The microwave drill is a novel process for creating shaped holes in nonconductive materials. Its inherent material selectivity makes the microwave drill ideally suited for the controlled removal of ceramic coatings from underlying metallic substrates. In this paper, it is shown that the microwave drill process can drill through ceramic thermal barrier coatings (TBCs) to uncover an array of simu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Applied Ceramics
سال: 2018
ISSN: 1743-6753,1743-6761
DOI: 10.1080/17436753.2018.1510820