Thermal Performance of Novel Multilayer Cool Coatings for Asphalt Pavements
نویسندگان
چکیده
منابع مشابه
Rut Resistant Asphalt Pavements
The three major distress conditions affecting the performance of asphalt pavements are permanent deformation or rutting, fatigue or load associated cracking, and low temperature or thermal cracking. In an earlier technical topics article (Fall, 1998), we examined the causes of fatigue cracking and the importance of good compaction during construction to help minimize this type of distress. In t...
متن کاملperformance of asphalt pavements in tehran
this paper identifies eleven types of asphalt pavement distress types, commonly occuring in tehran metropolitan area. of these, five distresses namely: corrugation; utility cut depression ;pot holes; alligator cracking; and loss of bridge deck surfacing are rather common. however, others namely: shear failure; shrinkage cracks; lane joint cracks; bleeding; and shoulder distress are less prevail...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملMultilayer graphitic coatings for thermal stabilization of metallic nanostructures.
We demonstrate that graphitic coatings, which consist of multilayer disordered graphene sheets, can be used for the thermal protection of delicate metal nanostructures. We studied cobalt slanted nanopillars grown by glancing angle deposition that were shown to melt at temperatures much lower than the melting point of bulk cobalt. After graphitic coatings were conformally grown over the surfaces...
متن کاملDynamic Hydraulic Conductivity (Permeability) of Asphalt Pavements
External pressures applied to a saturated pavement pore structure are often dynamic due to the repeated tire loading. Therefore, a dynamic permeability constant is more realistic representation of the response of a pavement pore structure than the Darcy’s permeability. To investigate the unsteady (dynamic) fluid flow in asphalt pavements, a 3D fluid flow model was developed using the lattice Bo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12121903