Thermal oxidative aging of polyethylene used as latent-heat-type thermal storage material.
نویسندگان
چکیده
منابع مشابه
Experimental Analysis of Latent Heat Thermal Energy Storage using Paraffin Wax as Phase Change Material
A significant amount of heat is wasted in manufacturing process, electricity generation, chemical and industrial process. Recovery and reuse of this energy through storage can be useful in conservation of energy. In the present study, a double pipe type heat exchanger has been designed and fabricated for low temperature industrial waste heat recovery using phase change material (PCM) paraffin w...
متن کاملMicroencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملThermal Analysis of Thermal Energy Storage Systemwith Phase Change Material
Due to fast depletion of conventional energy sources and ever increasing demand of energy, many researchers started paying attention to renewable energy sources.Thermal Energy Storage (TES) is one of the key technologies for energy conservation and has recently been developed to a point where it can have a significant impact on modern technologies. The present work deals with the study of a sph...
متن کاملThermal Analysis of laminated (Copper – Graphite) as Heat Spreader Material
Copper-Graphite laminate material design has been analysed, and this proposed composite has the ability to enhance heat dispersing more efficiently compared to the traditional high thermal conductivity with weight associated copper and high thermal resistance graphite. A finite element analysis (FEA) is carried out using the material (Cu – Gr) properties to investigate this proof. The design, t...
متن کاملTesting of High Thermal Cycling Stability of Low Strength Concrete as a Thermal Energy Storage Material
Concrete has the potential to become a solution for thermal energy storage (TES) integrated in concentrating solar power (CSP) systems due to its good thermal and mechanical properties and low cost of material. In this study, a low strength concrete (C20) is tested at high temperatures up to 600 ◦C. Specimens are thermally cycled at temperatures in the range of 400–300 ◦C, 500–300 ◦C, and 600–3...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 1985
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.42.151