Thermal Modelling Analysis of Spiral Wound Supercapacitor under Constant-Current Cycling
نویسندگان
چکیده
منابع مشابه
Thermal Modelling Analysis of Spiral Wound Supercapacitor under Constant-Current Cycling
A three-dimensional modelling approach is used to study the effects of operating and ambient conditions on the thermal behaviour of the spiral wound supercapacitor. The transient temperature distribution during cycling is obtained by using the finite element method with an implicit predictor-multicorrector algorithm. At the constant current of 2A, the results show that the maximum temperature a...
متن کاملThermal Cycling Impact on Supercapacitor Performance and Leakage Current under Constant Voltage Test
In this paper, we present a comparative study that focus on Supercapacitor (SC) thermal cycling and calendar ageing under constant voltage tests. The impacts of cycling temperature on SC performance and degradation rate are studied. Obtained results from thermal cycling ageing test are compared with those coming from simple calendar ageing test at constant voltage and constant temperature. The ...
متن کاملAn Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
Fracture analysis of glass/epoxy composites under different thermal cycling conditions is considered. Temperature difference, stacking sequence, fiber volume fraction and number of thermal cycles are selected as the experimental design factors. The Taguchi method is implemented to design of the experiment and an apparatus is developed for automatic thermal cycling tests. The tensile tests are d...
متن کاملSurface Degradation of Polymer Matrix Composites Under Different Low Thermal Cycling Conditions
The principal effects of mass degradation on polymer matrix composites (PMCs) are the decay of mechanical properties such as strength, elongation, and resilience. This degradation is a common problem of the PMCs under thermal cycling conditions. In this article, composite degradation was investigated by measurement of total mass loss (TML) using the Taguchi approach. Thermal cycling tests were ...
متن کاملReliability Assessment of Preloaded Solder Joint Under Thermal Cycling
The ever increasing power density in modern semiconductor devices requires heat dissipation solution such as heat sink to remove heat away from the device. A compressive loading is usually applied to reduce the interfacial thermal resistance between package and heat sink. In this paper, both experimental approaches and numerical modeling were employed to study the effect of compressive loading ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PLOS ONE
سال: 2015
ISSN: 1932-6203
DOI: 10.1371/journal.pone.0138672