Thermal Model and Performance Analysis of PVT Non-metallic Solar Water Heater
نویسندگان
چکیده
منابع مشابه
Thermal Performance of a Double-pass Solar Air Heater
This study analyzes the thermal performance of solar thermal energy using double-pass absorber plate in Sanandaj, Iran. To this end, a mathematical model was encoded according to the energy and exergy balance equations and solved by MATLAB software. Given the environmental conditions and radiation intensity of a winter day in Sanandaj, the effects of external parameters such as radiation intens...
متن کاملPerformance analysis of photovoltaic thermal (PVT) water collectors
The electrical and thermal performances of photovoltaic thermal (PVT) water collectors were determined under 500–800 W/m solar radiation levels. At each solar radiation level, mass flow rates ranging from 0.011 kg/s to 0.041 kg/s were introduced. The PVT collectors were tested with respect to PV efficiency, thermal efficiency, and a combination of both (PVT efficiency). The results show that th...
متن کاملnumerical analysis of using hybrid photovoltaic-thermal solar water heater in iran
introduction electrical performance of solar cells decreases with increasing cell temperature, basically because of growth of the internal charge carrier recombination rates, caused by increased carrier concentrations. hybrid photovoltaic/thermal (pvt) systems produce electrical and thermal energy simultaneously. pvt solar collectors convert the heat generated in the solar cells to low temperat...
متن کاملExperimental Study on an Enhanced Performance Solar Water Heater
The paper presents preliminary results of an experimental study on solar water heater with full width and 75% twisted tapes as heat transfer enhancement device. The study shows that the thermal efficiency due the use of the twisted tape increases by 4.5-8%; higher for the 75% twisted tape. Keyword Solar water heater (collector), tube-in-fin, twisted tape, thermal efficiency, performance enhance...
متن کاملExperimental Analysis of Solar Water Heater Using Pulsating Heat Pipe
Solar energy is used for solar water heater in domestic and industrial purpose. Pulsating heat pipe is a fast responding, flexible and high performance thermal conducting device. The CLPHP system described in this study relies on the natural forces of gravity and capillary action and does not require an external power source. The flat plate collector consisted of a 2 mm thick sheet of Aluminum ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Energy and Environmental Sustainability
سال: 2019
ISSN: 2455-2259
DOI: 10.47469/jees.2019.v07.100080