Thermal mirror and thermal lens techniques for semitransparent material characterization

NUMERICAL TECHNIQUES FOR DIFFERENT THERMAL INSULATION MATERIALS

The objective of this work is to predict the temperature of the different types of walls which are Ferro cement wall, reinforced cement concrete (RCC) wall and two types of cavity walls (combined RCC with Ferrocement and combined two Ferro cement walls) with the help of mathematical modeling. The property of low thermal transmission of small air gap between the constituents of combine materials...

Thermal Lens Spectroscopy

Confocal thermal-lens microscope.

The use of a confocal detection scheme in a dual-beam thermal-lens microscope is presented. The scheme allows the measurement of absorption factors down to 1.2 x 10(-7) in a 0.35-microm3 volume by use of a heating laser power of 100 mW incident upon the sample. Results are presented that prove that a 450-nm axial resolution is possible when a 1.2 water immersion objective lens with a N.A. of 1....

Material Discrimination and Thermal Perception

This research is focused on the development of a thermal display and understanding the nature of the thermal cues used to identify objects haptically. The objective of the present set of experiments was to measure material discrimination when thermal cues are the main source of information about the materials. A two-alternative forcedchoice task was used to assess discrimination. Of the five ma...

Quantitative linear and nonlinear resonance inspection techniques and analysis for material characterization: application to concrete thermal damage.

Developed in the late 1980s, Nonlinear Resonant Ultrasound Spectroscopy (NRUS) has been widely employed in the field of material characterization. Most of the studies assume the measured amplitude to be proportional to the strain amplitude which drives nonlinear phenomena. In 1D resonant bar experiments, the configuration for which NRUS was initially developed, this assumption holds. However, i...