Thermal Fatigue Analysis of Exhaust Manifold
نویسندگان
چکیده
منابع مشابه
Evaluation of Thermal Barrier Coating in Low Cycle Fatigue Life for Exhaust Manifold
This paper presents low cycle fatigue (LCF) life prediction of a coated and uncoated exhaust manifolds. First Solidworks software was used to model the exhaust manifolds. A thermal barrier coating system was applied on the tubes c of the exhaust manifolds, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat ...
متن کاملThermo-mechanical high-cycle fatigue analysis of exhaust manifold of turbocharged engine with two-way coupling FSI
NNowadays, car manufactures in order to increasing torque and power with consider to fuel consumption, have swept to production of turbocharged engines. With consider to exhaust gas-temperature rises in boosted engines, recognition of critical locations of exhaust manifold in the worse condition of engine (full load and maximum speed), to prevent fracture of exhaust manifold is very important. ...
متن کاملExperimental and finite element vibrational analysis of exhaust manifold heat shield
Most of internal combustion engines have one or two heat shields that have been installed on the exhaust manifold to avoid the heat transfer to upper parts of the engine such as the valve cover. In some engines, this part fails due to the fracture and causes engine noise and other failures in the engine. In this paper, the failure of a heat shield due to vibrational loads of the engine has been...
متن کاملThermomechanical Analysis of Exhaust Manifold and Catalyst for with Fluid Structure Interaction
Design of exhaust manifold is important due to its effects on performance of catalyst, thermal and thermo- mechanical loads. In this paper, first transient analysis of fluid was carried out with FLUENT software, then time-average temperature and heat transfer coefficient contour for three cycle were mapped on inner surface of exhaust manifold with MATLAB software for thermomechanical analysis. ...
متن کاملIntegration of exhaust manifold with engine cylinder head towards size and weight reduction
In this research, a new exhaust manifold and its cooling jackets is first designed for the integrated exhaust manifold into cylinder head (IEMCH) for a turbocharged engine. Then, the gas exchange and flow analysis is carried out numerically to evaluate the proper conditions for the exhaust gas and the coolant stream respectively. Finally, the entire engine parts are thermally analyzed to assure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.32137