Thermal Experimental Analysis for Dielectric Characterization of High Density Polyethylene Nanocomposites
نویسندگان
چکیده
منابع مشابه
Dielectric, thermal and mechanical properties of zirconium silicate reinforced high density polyethylene composites for antenna applications.
A low cost and low dielectric loss zirconium silicate (ZrSiO4) reinforced HDPE (high-density polyethylene) composite has been developed for antenna applications. The 0-3 type composite is prepared by dispersing ZrSiO4 fillers for various volume fractions (0.1 to 0.5) in the HDPE matrix by the melt mixing process. The composite shows good microwave dielectric properties with a relative permittiv...
متن کاملDesign and fabrication of high density borated polyethylene nanocomposites as a neutron shield
Background: Polyethylene composites including boron can be used as an effective neutron shield. Our investigation focuses on manufacturing borated polyethylene nano-composite. The purpose of this study is to design a radiation shield for use in both neutron and gamma fields. Materials and Methods: Borated polyethylene shields containing 2%, and 5% weight percentage of Boron nano-particles w...
متن کاملCharacterization of Nanocomposites by Thermal Analysis
In materials research, the development of polymer nanocomposites (PN) is rapidly emerging as a multidisciplinary research field with results that could broaden the applications of polymers to many different industries. PN are polymer matrices (thermoplastics, thermosets or elastomers) that have been reinforced with small quantities of nano-sized particles, preferably characterized by high aspec...
متن کاملSynthesis and Characterization of Chrysotile/Polyethylene Nanocomposites
Polyethylene/chrysotile nanocomposites with different amount (0.4 to 6.7 wt%) of filler were prepared by in situ polymerization method using the metallocene Cp2ZrCl2 as catalyst and methylaluminoxane (MAO) as co-catalyst. Previous to polymerization, raw chrysotile was treated by three different methods that used thermal treatment and acid leaching. In method A, raw chrysotile was treated therma...
متن کاملdesign and fabrication of high density borated polyethylene nanocomposites as a neutron shield
background: polyethylene composites including boron can be used as an effective neutron shield. our investigation focuses on manufacturing borated polyethylene nano-composite. the purpose of this study is to design a radiation shield for use in both neutron and gamma fields. materials and methods: borated polyethylene shields containing 2%, and 5% weight percentage of boron nano-particles were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Electrical and Electronic Engineering
سال: 2016
ISSN: 1804-3119,1336-1376
DOI: 10.15598/aeee.v14i3.1664