Thermal desorption of CO and H2 from degassed 304 and 347 stainless steel

Compressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers

Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...

Corrosion Performance and Tribological Properties of Carbonitrided 304 Stainless Steel

Radiation-induced Segregation and Void Swelling in 304 Stainless Steel

. Void swelling and radiation-induced segregation have been measured in 304 stainless steel. Samples were irradiated in the outer regions of the EBR-11reactor where displacement rates of 2.OX10-8and 6.6 xl 0-8dpds are comparable to those in pressurized water reactor components. Samples were inadiated at temperatures from 371-390°C to total doses of up to 20 dpa. Void swelling reached a maximum ...

Magnetic Properties of Metastable 304 Stainless Steel with Bcc Structure

Ordinary 304 stainless steel has a fcc structure and is non-magnetic at room temperature. By using a vapor quenching method, we have fabricated single-phase metastable bcc 304 stainless steel which is strongly ferromagnetic with a magnetization of 130 emu/g and a Curie temperature in excess of 550 OC. Upon subsequent annealing above 550 OC, the metastable bcc state transforms back into the usua...

Microstructural analysis of expanded stainless steel 304 cylinders

A gas-gun technique to radially expand cylinders of a chosen material, based on a technique developed in 1979, has recently been re-established. Stainless steel 304 cylinders of length 160 mm, internal diameter 67 mm and thickness either 0.5 or 1.5 mm have been expanded using a 70 mm bore single-stage gas-gun. Microstructural analysis of the recovered specimens was performed using optical micro...