Thermal Degradation Behavior of Biomass Depending on Torrefaction Temperatures and Heating Rates
نویسندگان
چکیده
منابع مشابه
Biomass Pyrolysis: Comments on Some Sources of Confusions in the Definitions of Temperatures and Heating Rates
Biomass pyrolysis is usually characterized on the basis of temperature and heating rate. Unfortunately, these parameters are badly defined in processing reactors as well as in laboratory devices. From the results of simplified models, the present paper points out the significant mistakes that can be made when assuming that the actual temperature and heating rate of reacting biomass particles ar...
متن کاملThermal Degradation of Polymers at High Temperatures
Work on thermal ~egradation of poly mers has prev iously been carried out aL lempC'mt ures up to about 500 G. In the present work the range has been extend cd to 850 0 C. Polystyrene was pyrolyzed in a vacuum and also in helium at atmos pheric pressure at 3620 and at 850 0 C. Analysis of t he volatile products indicates that higher temperatures a nd hi~her. pressures cause a greater fragmen tat...
متن کاملTorrefaction Kinetics of Norwegian Biomass Fuels
Torrefaction kinetics of Norwegian biomass fuels, including spruce (softwood) and birch (hardwood) was studied using a thermogravimetric analyser. Small samples of approximately 10 mg and particle size of 63−125 μm were heated at a constant heating rate of 5 °C/min and kept afterwards for 4 hours in isothermal conditions at different temperatures (230, 240, 250, 260, 270 and 280 °C). A two-step...
متن کاملEffect of Torrefaction Process Parameters on Biomass Feedstock Upgrading
Biomass is a primary source of renewable carbon that can be utilized as a feedstock for biofuels or biochemicals production in order to achieve energy independence of energy importing countries. The low bulk density, high moisture content, degradation during the storage, and low energy density of raw lignocellulosic biomass are all significant challenges in supplying agricultural residues as a ...
متن کاملEffect of Fe3+–MMT on thermal degradation and mechanical behavior of PVP/Amylose nanocomposite films
Novel nanocomposite films based on amylose (AM) and Fe3+-montmorillonite (Fe3+–MMT) in the matrix of poly (vinyl pyrrolidone) (PVP) were fabricated by using a solution casting method. The X-Ray diffractional analysis indicated that an ion-exchange process occurred between Fe3+–MMT and PVP. Thermogravimetrical analysis (TGA), differential termogravivetrical analy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Wood Science and Technology
سال: 2016
ISSN: 1017-0715
DOI: 10.5658/wood.2016.44.5.685