Thermal decoloration kinetics of spirooxazines in Ormocer coatings prepared via sol-gel processing
نویسندگان
چکیده
منابع مشابه
Contaminant Resistant Sol-Gel Coatings
Valerie Rapson Greece Olympia High School Advisor: Kenneth L. Marshall University of Rochester Laboratory for Laser Energetics Summer High School Research Program 2005 1. Abstract Sol-gel coatings are used on the OMEGA laser optics as anti-reflection (AR) coatings to maximize their transmittance. Over time, trace organic compounds in the laser bay contaminate these sol-gel coatings, reducing th...
متن کاملKinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process
Sol-gel process was chosen to produce a photocatalytic film to degrade methylene blue. In order to study structural and morphological properties of the coatings, a base sol of TTIP, I-PrOH, and DEA was prepared. Then with addition of 45g/L PEG 2000, 30g/L TiO2 and 15g/L PEG 2000 + 30g/L TiO2, to the base sol, three other sols were produced. The results of this study indica...
متن کاملEffect of rheology and processing parameters on the EPD coatings of basic sol-gel particulate sol
Homogeneous thick silica coatings were prepared onto metals substrates by Electrophoretic Deposition (EPD) using particulate sol-gel sols. The synthesis of the sols was performed by mixing tetraethoxysilane and methyltriethoxysilane under basic catalysis. The synthesis, storage and processing conditions were optimised, correlating the rheological properties of the sols with EPD performance and ...
متن کاملContamination Resistant Sol-Gel Antireflective Coatings
Silica-based sol-gel antireflective (AR) optical coatings are critical components of high peak power laser systems. Water vapor and volatile organic compounds can contaminate these coatings, reducing both their antireflective efficiency and laser-damage resistance. Previous work has shown that alkylation of free hydroxyl groups on the silica sol-gel with organosilicon compounds in solution can ...
متن کاملAbrasion Resistant Anti-Reflective Sol-Gel Coatings
Many optics in both the OMEGA and OMEGA EP lasers are coated with anti-reflective (AR) silane sol-gel to maximize their transmittance. Although these coatings are highly resistant to both airborne contaminants and laser damage, they are susceptible to mechanical damage by abrasion, and thus require extra care during the handling, installation and alignment of sol-gel optics. Previous “hardened”...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 1996
ISSN: 0022-2461,1573-4803
DOI: 10.1007/bf00360744