Thermal Cycling Behavior of Air Plasma-Sprayed and Low-Pressure Plasma-Sprayed Environmental Barrier Coatings
نویسندگان
چکیده
Yb2Si2O7/Si environmental barrier coatings (EBCs) were produced by air plasma spray (APS) and low-pressure (LPPS) processes. The phase composition, microstructure, bonding strength of APS LPPS EBCs investigated. Thermal cycling tests performed in steam atmosphere respectively at 1316 °C for both EBCs. There is no coating failure after 900 cycles. In contrast, have an average life 576 cycles a test 90% H2O + 10% while survived 1000 without failure. superior durability the compared to same environment attributed significantly reduced thermally grown oxide (TGO) growth rate because denser crack-free higher strength, coefficient thermal expansion (CTE) mismatch (less Yb2SiO5 phase)
منابع مشابه
Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading
An experimental investigation was conducted to find the effect of spraying method of coating of Thermal Barrier Coatings (TBCs) on their oxidation behaviour and resistance to various thermal loading. Isothermal and thermal shock tests were performed in order to study oxidation behaviour of air plasma sprayed Bond Coat (BC) and assess its effect on TBCs lifetime under the stated loadings. Specim...
متن کاملThermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier Coatings
Suspension plasma spraying (SPS) has become an interesting method for the production of thermal barrier coatings for gas turbine components. The development of the SPS process has led to structures with segmented vertical cracks or column-like structures that can imitate strain-tolerant air plasma spraying (APS) or electron beam physical vapor deposition (EB-PVD) coatings. Additionally, SPS coa...
متن کاملSimulation of stresses and delamination in a plasma-sprayed thermal barrier system upon thermal cycling
A thermal barrier system with plasma-sprayed thermal barrier coating (TBC) has been analyzed subject to thermal cycling. The thermally grown oxide (TGO) is allowed to grow at the peak temperature in the cycle, with both thickening and lateral components of the growth strain. The stresses in the TGO are also allowed to relax at high temperature when they attain a critical level. The bond coat is...
متن کاملHigh-temperature degradation of plasma sprayed thermal barrier coating systems
Thermal barrier coating systems (TBCs) are used in gas turbines to prevent high-temperature degradation of metallic materials in the combustor and turbine. One of the main concerns regarding TBCs is poor reliability, and accurate life prediction models are necessary in order to fully utilise the beneficial effects of TBCs. This research project aims at developing deeper understanding of the deg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2021
ISSN: ['2079-6412']
DOI: https://doi.org/10.3390/coatings11070868