Thermal Cycle Resistance of Yttria Stabilized Zirconia Coatings Prepared by MO-CVD
نویسندگان
چکیده
منابع مشابه
Morphology and thermal conductivity of yttria-stabilized zirconia coatings
An electron beam directed vapor deposition method was used to grow 7 wt.% Y2O3–ZrO2 (7YSZ) coatings and the effects of substrate rotation upon the coating porosity, morphology, texture, and thermal conductivity were explored. As the rotation rate was increased, the texture changed from Æ111æ to Æ100æ. Under stationary deposition, the coatings were composed of straight columns, while low-frequen...
متن کاملWEAR REESISTANCE OF NANOSTRUCTURED AND CONVENTIONAL YTTRIA-STABILIZED ZIRCONIA COATINGS
Partially stabilized zirconia (PSZ) has been proven to be an excellent candidate as a thermal barrier coating (TBe) for hot sections in, for instance, heat or internal combustion engines and gas turbine parts. The main functions of these coatings are reducing heat losses, reducing fuel consumption, increasing efficiency, and extending durability and life. One of the main problems involved is we...
متن کاملEquilibrium Analysis of CVD of Yttria-Stabilized Zirconia
The calculations performed in this study indicate that efficient deposition of tetragonal yttria-stabilized zirconia ~YSZ! by chemical vapor deposition ~CVD! is feasible using metal chloride precursors ~Zr-Y-C-O-H-Cl system!. As reported in the literature, this work demonstrates that high oxygen content is necessary to efficiently utilize metal chloride precursors for depositing tetragonal YSZ ...
متن کاملFracture resistance of yttria-stabilized zirconia dental implant abutments.
PURPOSE An in vitro study was performed to assess the effect of different degrees of clinical reduction of zirconia abutments on the failure load of clinical assemblies. MATERIALS AND METHODS Zirconia abutments (Y-TZP Ceramic Abutment, Astra Tech) were prepared with 0, 0.5, or 1 mm of external axial reduction starting 1 mm above the height-of-contour. Abutments (n = 10) were attached to impla...
متن کاملInvestigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting
In this study various yttria doped zirconia based thin films were prepared by the aqueous tape casting method. The rheological property of the paste was studies. The phase content and microstructure of the samples was investigated by X-ray diffraction and scanning electron microscope, respectively. The mechanical properties of thin films were studied by Vickers microhardness and nanoindentatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2005
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.46.1318