منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولSimulation and Optimization of a Naphtha Thermal Cracking Pilot Plant
In thermal cracking plants, it is desired to apply an optimal temperature profile along the reactor to minimize the operation cost. In this article a simulator is developed by the use of a mathematical model, which describes the static operation of a naphtha thermal cracking pilot plant. The model is used to predict the steady state profiles of the gas temperature and product yields. Using ...
متن کاملWood-derived olefins by steam cracking of hydrodeoxygenated tall oils.
Tall oil fractions obtained from Norwegian spruce pulping were hydrodeoxygenated (HDO) at pilot scale using a commercial NiMo hydrotreating catalyst. Comprehensive two dimensional gas chromatography (GC×GC) showed that HDO of both tall oil fatty acids (TOFA) and distilled tall oil (DTO) produced highly paraffinic hydrocarbon liquids. The hydrotreated fractions also contained fatty acid methyl e...
متن کاملMulti-objective Genetic Optimization of Ethane Thermal Cracking Reactor
An industrial ethane thermal cracking reactor was modeled assuming a molecular mechanism for the reaction kinetics coupled with material, energy, and momentum balances of the reactant-product flow along the reactor. To carry out the multi-objective optimization for two objectives such as conversion and ethylene selectivity, the elitist non-dominated sorting genetic algorithm was used. The Paret...
متن کاملInvestigation on Indentation Cracking-Based Approaches for Residual Stress Evaluation
Vickers indentation fracture can be used to estimate equibiaxial residual stresses (RS) in brittle materials. Previous, conceptually-equal, analytical models were established on the assumptions that (i) the crack be of a semi-circular shape and (ii) that the shape not be affected by RS. A generalized analytical model that accounts for the crack shape and its change is presented. To assess these...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Fuel Society of Japan
سال: 1977
ISSN: 0369-3775,2185-226X
DOI: 10.3775/jie.56.12_961