Thermal Conductivity of Cu-Cr-Zr-Ti Alloy in the Temperature Range of 300–873 K
نویسندگان
چکیده
منابع مشابه
High Conductivity and Adhesion of Cu-Cr-Zr Alloy for TFT Gate Electrode
Junbiao Peng 1, Kuankuan Lu 1, Shiben Hu 1 ID , Zhiqiang Fang 1, Honglong Ning 1,* ID , Jinglin Wei 1, Zhennan Zhu 1, Yicong Zhou 1, Lei Wang 1, Rihui Yao 1,* ID and Xubing Lu 2 1 Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China; [email protected] (J.P.); kk-lu@f...
متن کاملProduction of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE)
This study focused on the effect of electro slag remelting process (ESR) on microstructure and composition of an as-cast alloy of Cu-Cr-Zr. These observations revealed that applying ESR process results in a more uniform distribution of alloying elements, however a slight aggregation of large precipitates and inclusions existed in as-cast ingot was found. Additionally, impurities like P, S and M...
متن کاملMeasurement of low-temperature transport properties of Cu-based Cu-Zr-Ti bulk metallic glass
The transport properties, including electrical resistivity , thermopower S , and thermal conductivity of bulk metallic glass alloys Cu64Zr28.5Ti7.1, Cu62.3Zr23.7Ti10, Cu60.6Zr26.9Ti12.5 and Cu58.8Zr26.2Ti15 in the temperature range 10–300 K are reported. The temperature variations of electrical resistivity in these alloys, with a negative temperature coefficient, are found to be rather weak. Th...
متن کاملDynamic recrystallization behavior and processing map of the Cu–Cr–Zr–Nd alloy
Hot deformation behavior of the Cu-Cr-Zr-Nd alloy was studied by hot compressive tests in the temperature range of 650-950 °C and the strain rate range of 0.001-10 s(-1) using Gleeble-1500D thermo-mechanical simulator. The results showed that the flow stress is strongly dependent on the deformation temperature and the strain rate. With the increase of temperature or the decrease of strain rate,...
متن کاملFormation, Thermal Stability and Mechanical Properties of Cu-Zr and Cu-Hf Binary Glassy Alloy Rods
Glassy alloy rods with diameters up to 1.5mm exhibiting a large supercooled liquid region before crystallization and high mechanical strength were formed in Cu-Zr and Cu-Hf binary alloy systems by the copper mold casting method. The large supercooled liquid region exceeding 40K was obtained in the composition range of 30 to 70 at%Zr and 35 to 60 at%Hf. The largest value of the supercooled liqui...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISRN Metallurgy
سال: 2012
ISSN: 2090-8717
DOI: 10.5402/2012/580659