Thermal Conductivity Measurement Method for Isotropic Conductive Adhesives
نویسندگان
چکیده
منابع مشابه
Analysis of 3ω method for thermal conductivity measurement
The 3ω method for measurement of thermal conductivity of a solid usually consists of a strip heater above a substrate, and the method is based on an approximate solution of the heat conduction problem in which the heater thickness is neglected. We establish a two-dimensional heat conduction model for the heater-on-substrate 3ω method which takes into account the finite thickness of the heater. ...
متن کاملThermal Conductivity and Contact Resistance Measurements for Adhesives
Thermal adhesives that contain large concentrations of high thermal conductivity filler materials, such as ceramics or metals, are widely used by the electronics industries in a variety of applications. The thermal properties of these materials, such as the thermal contact resistance across a bonded joint and the thermal conductivity of the bulk material, are critical to the selection of the “b...
متن کاملConductive Adhesives
S ince the advent of through-hole printed wiring boards in the 1950s, surface-mount technology has advanced through chip capacitors and resistors to high-density multilayer hybrids and printed circuit boards. Throughout this 40-year span, solder paste has been the accepted technology for component attach.' The present trend toward fine-pitch resolution ( t0.020") and multilayer constructions of...
متن کاملElectrically Conductive Adhesives
Electrically conductive adhesives are being used in electronic packaging for several decades. A brief review of the dynamic development of conductive adhesives under the influence of the miniaturization, the adaptation of environmental friendly manufacturing processes is presented. With respect to the importance of isotropically conductive adhesives (ICA), a new contact model to analyze the pri...
متن کاملMeasurement of Thin Film Isotropic and Anisotropic Thermal Conductivity Using 3ω and Thermoreflectance Imaging
The 3ω method is a well established technique for experimentally extracting thermal conductivity of thin films and substrates. The 3ω method calculates thermal conductivity by measuring thin film temperature response to a metal strip heater deposited on the material’s surface. The electrical resistance of the metal strip is used as both heat source and temperature sensor. An important factor in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Netsu Bussei
سال: 2015
ISSN: 0913-946X,1881-414X
DOI: 10.2963/jjtp.28.22