Thermal characteristics of grooved heat pipe with hybrid nanofluids
نویسندگان
چکیده
منابع مشابه
Flow and Convective Heat Transfer Characteristics of Spiral Pipe for Nanofluids
This paper presents an experimental investigation of convective heat transfer coefficient for nanofluids using spiral pipe heat exchanger. The aim of this study is to investigate experimentally flow and convective heat transfer characteristics of water-based nanofluids flowing through a spiral pipe. The test section consist of spiral pipe with ratio pitch per diameter is 7.0 and mean hydraulic ...
متن کاملThermal and hydraulic characteristics of nanofluid in a triangular grooved microchannel heat sink (TGMCHS)
A numerical simulation is conducted to examine the heat transfer and fluid flow characteristics of nanofluids in a triangular grooved microchannel heat sink (TGMCHS). The governing and energy equations are solved using the finite volume method (FVM). The influence of the geometrical parameters such as the angle (50–100°), depth (10–25 lm) and pitch (400–550 lm) of the groove on the thermal perf...
متن کاملAnalysis and Optimization of Trapezoidal Grooved Microchannel Heat Sink Using Nanofluids in a Micro Solar Cell
It is necessary to control the temperature of solar cells for enhancing efficiency with increasing concentrations of multiple photovoltaic systems. A heterogeneous two-phase model was established after considering the interacting between temperature, viscosity, the flow of nanofluid, and the motion of nanoparticles in the nanofluid, in order to study the microchannel heat sink (MCHS) using Al2O...
متن کاملThermal performance of flat-shaped heat pipes using nanofluids
0017-9310/$ see front matter 2009 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2009.12.007 * Corresponding author. E-mail address: [email protected] (K. Vafai). Analytical models are utilized to investigate the thermal performance of rectangular and disk-shaped heat pipes using nanofluids. The liquid pressure, liquid velocity profile, temperature distribution of the heat pipe wall, tempera...
متن کاملNumerical study of the enhancement of heat transfer for hybrid CuO-Cu Nanofluids flowing in a circular pipe.
A numerical simulation model for laminar flow of nanofluids in a pipe with constant heat flux on the wall was built to study the effect of the Reynolds number on convective heat transfer and pressure loss. The investigation was performed for hybrid nanofluids consisting of CuO-Cu nanoparticles and compared with CuO and Cu in which the nanoparticles have a spherical shape with size 50, 50, 50nm ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermal Science
سال: 2011
ISSN: 0354-9836,2334-7163
DOI: 10.2298/tsci100209056h