Thermal Bending of the Rotor Due to Rotor-to-Stator Rub
نویسندگان
چکیده
منابع مشابه
Stator Core Stator Winding in Slots Rotor
Induction machines are perhaps the most widely used of all electric motors. They are generally simple to build and rugged, offer reasonable asynchronous performance: a manageable torque-speed curve, stable operation under load, and generally satisfactory efficiency. Because they are so widely used, they are worth understanding. In addition to their current economic importance, induction motors ...
متن کاملDynamic Analysis of a Hybrid Squeeze Film Damper Mounted Rub-Impact Rotor-Stator System
An investigation is carried out on the systematic analysis of the dynamic behavior of the hybrid squeeze-film damper HSFD mounted a rotor-bearing system with strongly nonlinear oil-film force and nonlinear rub-impact force in the present study. The dynamic orbits of the system are observed using bifurcation diagrams plotted using the dimensionless rotating speed ratio as control parameters. The...
متن کاملAn Investigation on the Causes of a Rotor Bending and its Thermal Straightening (TECHNICAL NOTE)
Distortion or bend in a turbine rotor (especially HIP rotors) may be caused by a number of factors, either singularly or in combination. In general, the causes of rotor bend can be classified invariably in two categories: Rapidly forming permanent rotor bends and/or Slower forming rotor bends, which could trip the turbines’ emergency stop. One of the major modifying solutions for rapid repairin...
متن کاملStator Core Stator Winding in Slots Rotor Winding or Cage in Slots Rotor
Induction machines are perhaps the most widely used of all electric motors. They are generally simple to build and rugged, offer reasonable asynchronous performance: a manageable torque-speed curve, stable operation under load, and generally satisfactory efficiency. Because they are so widely used, they are worth understanding. In addition to their current economic importance, induction motors ...
متن کاملFoam Generation in Rotor-Stator Mixers
non-ideality, it will tend to reduce differences between calibraiion and predictior;. To do this of course is not always possible, particularly where the effect of changing dyebath conditions is under consideration, e.g. liquor ratio, electrolyte concentration, pH and dye concentration. To attempt calibration experiments to adequately cover the results of such changes would remove the need for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 2000
ISSN: 1023-621X
DOI: 10.1155/s1023621x00000099