Thermal Behavior of Green Cellulose-Filled Thermoplastic Elastomer Polymer Blends

Mechanical Behavior of Filled Thermoplastic Polymers

Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR

improvement in mechanical properties of cellulose fibers-thermoplastic polymer composites

0

Predicting the Crack Growth Behavior in a Filled Elastomer

In this study, single-edge cracked uniaxial specimens with an initial crack length of 0.1 in or 0.3 in and wedge-shaped sheet specimens with an initial crack length of 0.3 in were tested at a constant displacement rate of 50 in/min under 1000 psi confining pressure. The specimens were made of a highly filled polymeric material, containing 86% by weight of hard particles embedded in a rubbery ma...

Rheological and Mechanical Properties of Ultra-fine Cellulose-Filled Thermoplastic Epoxy Composites

Thermoplastic epoxy resin (TPER)-based composites containing different amounts of ultra-fine cellulose (UFC) were prepared via melt compounding and injection molding. The effect of UFC loading on the mechanical properties and dynamic rheological behavior of the UFC-filled TPER composites was analyzed. The UFC-filled composites displayed higher complex viscosities than those of the neat TPER com...