Thermal autofrettage of dissimilar material brazed joints
نویسندگان
چکیده
منابع مشابه
Characteristics and Mechanical Properties of Bypass-Current MIG Welding-Brazed Dissimilar Al/Ti Joints
Abstract—Joining of 1mm thick aluminum 6061 to titanium TC4 was conducted using Bypass-current MIG welding-brazed, and stable welding process and good bead appearance were obtained. The Joint profile and microstructure of Ti/Al joints were observed by optical microscopy and SEM and then the structure of the interfacial reaction layers were analyzed in details. It was found that the intermetalli...
متن کاملOn-line Detection of Imperfections in Laser-brazed Joints
This paper presents a joint imperfection detection method for on-line process monitoring of laser brazing processes. The method uses images from two spectral ranges and fuses their features with the scores of the separately calculated log-likelihood ratios to decide whether the currently generated part of a joint contains an imperfection or not. To avoid unconfident classifications, a decision ...
متن کاملStudy on Characteristics of Dissimilar Material Joints for ITER First Wall
The first wall (FW) of ITER blanket includes beryllium (Be) armor tiles joined to CuCrZr heat sink with stainless steel (SS) cooling tube and backing plate in order to improve plasma performance and reduce thermal stress. Since these joints must withstand thermal and mechanical loads caused by the plasma and electromagnetic force, it is important to evaluate the strength and thermal fatigue lif...
متن کاملCreep behavior and in-depth microstructural characterization of dissimilar joints
The 700 °C power plants currently under development will utilize Ni-base alloys such as alloy 617 for components to be operated at temperatures >650 °C. Due to economic reasons for components or parts of components which are subjected to temperatures <650 °C, 2% Cr or 9-12% Cr steels is used, depending on the required mechanical properties. This makes the dissimilar joining of Ni-base alloys an...
متن کاملEvolution of Microstructure in Brazed Joints of Austenitic-Martensitic Stainless Steel with Pure Silver Obtained with Ag-27Cu-5Sn Brazing Filler Material
Brazing of an austenitic-martensitic stainless steel (AMSS) with pure silver was carried out at 1053 K, 1073 K, and 1093 K (780 C, 800 C, and 820 C) with Ag-27Cu-5Sn (wt pct) as brazing filler material (BFM). Wettability of the liquid BFM over base AMSS surface was found to be poor. Application of nickel coating to the steel was observed to enhance the wettability and to enable the formation of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2015
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2014.11.019