Thermal analysis of hot strip rolling using finite element and upper bound methods

3D finite element analysis of surface roughness and friction in hot strip rolling

An Upper Bound Analysis of Sandwich Sheet Rolling Process

In this research, flat rolling process of bonded sandwich sheets is investigated by the method of upper bound. A kinematically admissible velocity field is developed for a single layer sheet and is extended into the rolling of the symmetrical sandwich sheets. The internal, shear and frictional power terms are derived and they are used in the upper bound model. Through the analysis, the rolling ...

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Effect of Internal Stress of Incoming Strip on Hot Rolling Deformation Based on Finite Element and Infinite Element Coupling Method

Limited by the deficiency of the finite element method (FEM) to deal with infinite domain problems, the traditional FEM rolling model is not suitable enough to study the effect of the complex internal stress of the incoming strip on hot rolling deformation. To solve this problem, the finite element and infinite element (FE-IE) coupling method is adopted, where the finite element is for the roll...

Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...