THEORY OF PIERCING ACTION BY ROTARY METHOD IN MAKING SEAMLESS STEEL TUBES
نویسندگان
چکیده
منابع مشابه
Online Eccentricity Monitoring of Seamless Tubes in Cross-Roll Piercing Mill
Wall-thickness eccentricity is a major dimensional deviation problem in seamless steel tube production. Although eccentricity is mainly caused by abnormal process conditions in the cross-roll piercing mill, most seamless tube plants lack the monitoring at the hot piercing stage but only inspect the quality of finished tubes using ultrasonic testing (UT) at the end of all manufacturing processes...
متن کاملSieve Tubes in Action
A method was designed for in vivo observation of sieve element/companion complexes by using confocal laser scanning microscopy. A leaf attached to an intact fava bean plant was mounted upside down on the stage of a confocal microscope. Two shallow paradermal cortical cuts were made in the major vein. The basal cortical window allowed us to observe the phloem intact. The apical window at 3 cm fr...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولDetermination of the Optimal Reduction Ratio for Least Springback during Cold Drawing of Seamless Tubes
Cold drawing process is one of the most used metals forming processes in industries for forming seamless tubes. This process of plastic deformation of metals occurs below the recrystallization temperature and is generally performed at room temperature. When metal is cold worked, upon the release of forming force, the springback occurs. In this paper, the springback effect of the seamless tube t...
متن کاملCold End Forming Of Welded Steel Tubes
The production of custom and specific tube end shapes by cold end forming using a die is generally limited to seamless tubular parts. Current research work in the field follows the same trend as that of industry and, therefore, there is no accumulated experience, no practical design rules, and no information available in the specialized literature concerning the utilization of tube end forming ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1943
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1915.29.12_904