Theoretical Investigation of Friction Forces between Vane Tip and Cam-Ring in Oil Vane Pumps

Improvement Of Abnormal Wear Between The Vane-slot And Vane In Rotary Compressor

The reason for the abnormal wear between the vane-slot and the vane in the rotary compressor is analyzed in this paper. Firstly, the influence of lubrication at the clearance, the machining equipment accuracy and oil circulation (oil flow rate) is analyzed. Then the material characteristics including the hardness of the vane and vane-slot, the surface treatment of the vane and the deformation o...

Mixed Lubrication Analysis of Vane Tip in Rotary Compressor

This paper shows the mixed lubrication analysis between the vane tip and rolling piston in a rotary refrigerant compressor, coupling the motion equations of vane and rolling piston, the elastohydrodynamic lubrication (EHL) analysis of line contact and the equations of viscosity characteristics of lubricating oil as a function of oil pressure, oil temperature and concentration of refrigerant. Th...

Design and Friction Analysis of the Revolving Vane Compressor

Over the years, rotary compressors have gained significant popularity and widespread usage because of their compact nature and good vibration characteristics. Although possessing many advantages over the reciprocating compressors, one of the performance limitations of the rotary machines is their inferior mechanical efficiency due to the existence of large frictional losses, which occurs as a r...

Analysis of Mechanical Friction in Rotary Vane Machines

Vane Behavior in Vane Compressors Under Start-up Operation

Vane oompressors can not maintain contact between a vane tip and a cylinder wall under start-up operation since backpressure acting on the vane is not sufficient. We theoretically analyzed transient behavior of the vane under the start-up operation by taking account of changes of the backpressure and discharge pressure after compression starting. The validity of the theoretical analysis was con...