Theoretical and experimental study on vibration modal for simply supported bridge

Theoretical Modal Analysis of Freely and Simply Supported RC Slabs

This paper focuses on the dynamic behavior of reinforced concrete (RC) slabs. Therefore, the theoretical modal analysis was performed using two different types of boundary conditions. Modal analysis method is the most important dynamic analyses. The analysis would be modal case when there is no external force on the structure. By using this method in this paper, the effects of freely and simply...

Experimental and Theoretical Modal Analysis of Full-Sized Wood Composite Panels Supported on Four Nodes

Key elastic properties of full-sized wood composite panels (WCPs) must be accurately determined not only for safety, but also serviceability demands. In this study, the modal parameters of full-sized WCPs supported on four nodes were analyzed for determining the modulus of elasticity (E) in both major and minor axes, as well as the in-plane shear modulus of panels by using a vibration testing m...

Free Vibration of Hexagonal Panels Simply Supported at Discrete Points

Free vibration Study of simply supported cylindrical laminateds panels with piezoelectric layer

In the present study, vibration of cylindrical laminates with different layers and angles were studied. In order to actuate and polarize in radial direction, a piezoelectric layer was located at outer surface of composite shell. Laminates were assumed long enough so that plane strain state analysis in 2D can be used properly. In order to satisfy the boundary conditions, variables in terms of Fo...

Vibration Suppression of Simply Supported Beam under a Moving Mass using On-Line Neural Network Controller

In this paper, model reference neural network structure is used as a controller for vibration suppression of the Euler–Bernoulli beam under the excitation of moving mass travelling along a vibrating path. The non-dimensional equation of motion the beam acted upon by a moving mass is achieved.  A Dirac-delta function is used to describe the position of the moving mass along the beam and its iner...