The ZrO2 Formation in ZrB2/SiC Composite Irradiated by Laser
نویسندگان
چکیده
منابع مشابه
The ZrO2 Formation in ZrB2/SiC Composite Irradiated by Laser
In order to clearly understand the details of ZrO₂ formation during ablation, high intensity continuous laser was chosen to irradiate ZrB₂/SiC. The results reveal that there are two different modes of ZrO₂ formation depending on whether liquid SiO₂ is present. When liquid SiO₂ is present, ZrO₂ generated by the oxidation of ZrB₂ is firstly dissolved into SiO₂. Then, ZrO₂ will precipitate again, ...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولHeat generation by irradiated complex composite nanostructures.
Heating of irradiated metallic e-beam generated nanostructures was quantified through direct measurements paralleled by novel model-based numerical calculations. By comparing discs, triangles, and stars we showed how particle shape and composition determines the heating. Importantly, our results revealed that substantial heat is generated in the titanium adhesive layer between gold and glass. E...
متن کاملscanning electron microscope (sem) evaluation of composite surface irradiated by different powers of er:yag laser
introduction: the aim of this study was to evaluate the composite surface treated by different powers of erbium-doped yttrium aluminum garnet (er:yag) laser in comparison with bur preparation via scanning electron microscope. methods: fourteen composite resin blocks with 15× 10 × 10 mm dimensions were used in this study. the samples were divided to seven groups as follow: group 1 (power: 1 w, e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2015
ISSN: 1996-1944
DOI: 10.3390/ma8125475