The thermo-mechanical response of PP nanocomposites at high graphene loading
نویسندگان
چکیده
منابع مشابه
Enhanced mechanical properties of nanocomposites at low graphene content.
In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 +/- 0.002%. The mechanical properties measured were the Young's modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material's resistance to fatigue c...
متن کاملPreparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method
Despite the great potential of graphene as a nanofiller, achieving homogeneous dispersion remains the key challenge for effectively reinforcing polyolefin (such as polyethylene (PE) and polypropylene (PP)) nanocomposites. Therefore, in this research, we report a facile combined in situ polymerization and masterbatch method for fabricating PP/reduced graphene oxide (rGO) nanocomposites. In the p...
متن کاملMechanical and Morphological Properties of PP/MWNT/MMT Hybrid Nanocomposites
Polypropylene/Multiwall carbon nanotubes/Montmorillonite (PP/MWNTs/MMT) hybrid nanocomposites were prepared by using twin-screw extruder incorporating the polypropylene grafted maleic anhydride (PP-g-mA) as compotibilizer is used for better dispersion of nanoclay in the polymer matrix. The effect of MWNTs and MMT on the polypropylene matrix was investigated in terms of mechanical properties of ...
متن کاملThe Effect of Controlled Thermo Mechanical Processing on the Properties of a High Strength Steel
In this paper, an ultra low carbon High Strength Low Alloy Grade Steel was subjected to a two-step forging process and this was followed by different post cooling methods. The highest strength was obtained at a faster cooling rate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides and carbonitrides. At a slow cooling rate, the strength ...
متن کاملTheoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process
In this study, thermoplastic polyolefin elastomeric (TPO) nanocomposites were fabricated by friction stir processing. The effect of different pin geometries on clay dispersion and mechanical properties of the TPO nanocomposite reinforced with 3% wt nanoclay has been first investigated. The optimum pin geometry namely threaded cylindrical pin was then used to fabricate the nanocomposites contain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanocomposites
سال: 2015
ISSN: 2055-0324,2055-0332
DOI: 10.1179/2055033215y.0000000008