The thermal and mechanical behaviour of structural steel piping systems
نویسندگان
چکیده
منابع مشابه
The Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel
The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...
متن کاملThe Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel
The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...
متن کاملThermal-mechanical behaviour during initial solidification in continuous casting: steel grade effects
A transient finite-element model (CON2D) is applied to compute temperature, stress, and distortion of the steel shell during initial solidification. The model incorporates temperaturedependent properties, thermal shrinkage, phase transformations, and different elastic-viscoplastic constitutive equations for each phase (liquid, d, and c). The effects of sudden metal level fluctuations are simula...
متن کاملStudy and Comparison of Seismic Behaviour of Isolator-Damper Hybrid Control System with Conventional Structural Systems
In this paper, in addition to introduce a hybrid structural system contained local isolators and dampers, its behavior and functional capabilities were studied on a conventional structure. For this purpose, an RC frame building with six-story was designed based on valid codes and then, in four cases based on the number of spans, it was split into two separate adjacent frames. Base isolation was...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Pressure Vessels and Piping
سال: 2005
ISSN: 0308-0161
DOI: 10.1016/j.ijpvp.2004.06.012