The testing of cast iron
نویسندگان
چکیده
منابع مشابه
Cast Iron Metallurgy
Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...
متن کاملenvironmental effects of gol-e-gohar iron ore mine on groundwater of the area
gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...
Modeling of Ultrasonic Testing for Inspection of Nodular Cast Iron Insert
Nodular cast iron insert will be used as the inner component of nuclear fuel disposal canister. The outer cover of the canister is copper tube of 50 mm nominal thickness. Nodular cast iron insert is cast around several steel channels, which also strengthen the structure. The mechanical properties of the cast iron insert will be tested according EN-1563 /1/. According the specifications 100% NDT...
متن کاملTribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملGeometrical Optimization of the Cast Iron Bullion Moulds Based on Fracture Mechanics
In this paper, the causes of the crack initiation in cast iron bullion moulds in Meybod Steel Corporation are investigated and then some new geometrical models are presented to replace the current moulds. Finally, among the new presented models and according to the life assessment, the best model is selected and suggested as the replaced one. For this purpose, the three recommended moulds were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Franklin Institute
سال: 1905
ISSN: 0016-0032
DOI: 10.1016/s0016-0032(05)90001-x