The structure of a poly(ethylene) opposed flow diffusion flame
نویسندگان
چکیده
منابع مشابه
the effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Chemical Kinetic Modeling of a Methane Opposed Flow Diffusion Flame and - Comparison to Experiments
The chemical structure of an opposed flow, methane diffusion flame is studied using a chemical kinetic model and the results are compared to experimental measurements. The chemical kinetic paths leading to aromatics and polycyclic aromatics hydrocarbons (PAHs) in the diffusion flame are identified. These paths all involve resonantly stabilized radicals which include propargyl, allyl, cyclopenta...
متن کاملMicrogravity opposed-flow flame spread in polyvinyl chloride tubes
The effects of gravity on opposed-flow flame spread in a confined geometry were investigated experimentally in the 2.2-s drop tower at the NASA Glenn Research Center. Pure oxygen flowed through samples of 0.64-cminner-diameter polyvinyl chloride (PVC) tubing held either horizontally or vertically in a combustion chamber filled with nitrogen. The sample was ignited in normal gravity with a hot w...
متن کاملEffect of Gap Height on Thin Fuel Opposed Flow Flame Spread in the Narrow Channel Apparatus
The Narrow Channel Apparatus (NCA) is designed to establish a fully developed laminar flow profile above and below a thin, flat, solid fuel or on one side of a thick fuel for flame spread investigations. Due in part to its ability to suppress buoyantly-induced flow, the NCA is under investigation as a possible test method for screening materials for space flight applications. This study focused...
متن کاملRadiation modeling of a turbulent diffusion flame in diesel engine
The purpose of this study is to investigate the effect of radiation heat transfer on temperature distribution and heat flux to the walls of a diesel engine. A diffusion flame is modeled in a simple cylindrical geometry and boundary conditions are defined. A specific solver which can model the turbulent diffusion flame by considering radiation in participating media is used to solve the problem....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Symposium (International) on Combustion
سال: 1981
ISSN: 0082-0784
DOI: 10.1016/s0082-0784(81)80193-2