The Stability of Irradiation-Induced Defects in Zr <sub>3</sub>AlC <sub>2</sub>, Nb <sub>4</sub>AlC <sub>3</sub> and (Zr <sub>0.5</sub>,Ti <sub>0.5</sub>) <sub>3</sub>AlC <sub>2</sub> Max Phase-Based Ceramics
نویسندگان
چکیده
منابع مشابه
Impact of phase transition sequence on the electrocaloric effect in Pb(Nb,Zr,Sn,Ti)O-3 ceramics
The phase transition sequence in PbZrO3-based ceramics can be readily altered by chemical modification. In Pb0.99Nb0.02[(Zr0.57Sn0.43)(0.92)Ti-0.08](0.98)O-3 (PNZST 43/8/2), the sequence is ferroelectricantiferroelectric-paraelectric during heating, while in Pb0.99Nb0.02 (Zr0.85Sn0.13Ti0.02)(0.98)O-3 (PNZST 13/2/2), it is antiferroelectric-ferroelectric-paraelectric during heating. The electroc...
متن کاملElectromagnetic evaluation of hydrogen content in Zr 2.5%Nb alloy
R.Grimberg , M.L.Craus , A.Savin , R.Steigmann , M.Ruch 3 1 National Institute of Research and Development for Technical Physics, Iasi, Romania 2 Joint Institute for Nuclear Research, Dubna, Russia 3 CNEA, Buenos Aires, Argentina Abstract Zr 2.5%Nb alloys have wide utilization in nuclear energy engineering, being used at the fabrication of pressure tubes from Pressurized Heavy Water Reactors (P...
متن کاملstability analysis of implanted ti and zr-2.5%nb in jawbone by finite element analysis
background. improving the implantation conditions in order to reduce the failure is always desirable for researchers. the aim of this study was to compare two different types of dental implant materials from biomechnical viewpoint in order to introduce a novel simulation method to select suitable materials for dental implants. methods. in this research, drilling process was performed in the cor...
متن کاملSTRUCTURAL INTEGRITY CHANGES IN THE Zr-Nb ALLOY DURING HYDRIDE PHASE TRANSFORMATION UNDER THE THERMAL SHOCK
Structural changes and properties of zirconium alloy subjected to the thermal shock in the solar furnace were investigated. Specimens were prepared from unirradiated cold-worked RBMK Zr-2.5Nb fuel channel pressure tube material after adding hydrogen to the sections of the tubes up to 150 ppm. Tests were done at temperatures up to 1460 C and heating rates 50-83 C per second. After thermal treatm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SSRN Electronic Journal
سال: 2019
ISSN: 1556-5068
DOI: 10.2139/ssrn.3414012