The Production of Porous Hydroxyapatite Scaffolds with Graded Porosity by Sequential Freeze-Casting
نویسندگان
چکیده
منابع مشابه
The Production of Porous Hydroxyapatite Scaffolds with Graded Porosity by Sequential Freeze-Casting
Porous hydroxyapatite (HA) scaffolds with porosity-graded structures were fabricated by sequential freeze-casting. The pore structures, compressive strengths, and biocompatibilities of the fabricated porous HA scaffolds were evaluated. The porosities of the inner and outer layers of the graded HA scaffolds were controlled by adjusting the initial HA contents of the casting slurries. The interfa...
متن کاملFreeze casting of hydroxyapatite scaffolds for bone tissue engineering.
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze casting can be applied to s...
متن کاملFabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting method.
A room temperature camphene-based freeze-casting method was used to fabricate hydroxyapatite/tricalcium phosphate (HA/TCP) ceramic scaffolds. By varying the solid loading of the mixture and the freezing temperature, a range of structures with different pore sizes and strength characteristics were achieved. The macropore size of the HA/TCP bioceramics was in the range of 100-200 microm, 40-80 mi...
متن کاملPreparation of porous hydroxyapatite scaffolds
In this work, the sintering and grain growth of hydroxyapatite green bodies are analyzed in order to identify the optimum heat treatments for the preparation of porous hydroxyapatite scaffolds. Sintering in air at temperatures ranging between 1100 and 1200 °C yields dense materials with narrow grain-size distributions. The scaffolds are formed by the infiltration of polymer foams with hydroxyap...
متن کاملReverse freeze casting: a new method for fabricating highly porous titanium scaffolds with aligned large pores.
Highly porous titanium with aligned large pores up to 500 μm in size, which is suitable for scaffold applications, was successfully fabricated using the reverse freeze casting method. In this process we have newly developed, the Ti powders migrated spontaneously along the pre-aligned camphene boundaries at a temperature of 45.5°C and formed a titanium-camphene mixture with an aligned structure;...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2017
ISSN: 1996-1944
DOI: 10.3390/ma10040367