The microstructures, mechanical properties, and temperature distributions in nodular cast iron friction-welded joint
نویسندگان
چکیده
منابع مشابه
Microstructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
Dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. In this study, X53CrMnNiN219 (austenitic stainless steel) and X45CrSi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. The welded joint was then heat treated at 760 0C for 60 min. Mechanical prop...
متن کاملmicrostructure and mechanical properties of the friction welded joint between x53crmnnin219 and x45crsi93 stainless steel
dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. in this study, x53crmnnin219 (austenitic stainless steel) and x45crsi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. the welded joint was then heat treated at 760 0c for 60 min. mechanical prop...
متن کاملThe Microstructure and Mechanical Properties of Friction Stir Welded Ti6al4v Titanium Alloy under Β Transus Temperature
1 Faculty of Aerospace Engineering, Shenyang Aerospace University, No. 37 Daoyi South Avenue, Daoyi Development District, Shenyang 110136, China 2 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, No. 92 West Dazhi street, Nangang District, Harbin 100024, China 3 Beijing Aeronautical Manufacturing Technology Research Institute, No. 1 Dongjun Village, Chaoyang...
متن کاملEffect of tool position on microstructural and mechanical properties of friction stir butt welded joint of AA2024–AA7075 dissimilar alloys
In this research, butt joining of Al2024 and Al7075 plates were performed by Friction Stir Welding (FSW) and the effect of tool position on microstructural and mechanical properties in about 1 mm from center line of joint towards the advancing side (AS) and the retreating side (RS) was investigated at three positions of +1, 0, -1 mm. In this regard, the plates of Al2024 and Al7075 were selected...
متن کاملEffects of Rotational Velocity on Microstructures and Mechanical Properties of Surface Compensation Friction Stir Welded 6005a- T6 Aluminum Alloy
Article history: Received: 4.7.2014. Received in revised form: 2.9.2014. Accepted: 3.9.2014. Surface compensation friction stir welding (SCFSW) is successfully applied to weld 6005A-T6 aluminum alloy in order to eliminate disadvantages caused by flash and arc corrugation. The effects of rotational velocity on the microstructures and mechanical properties of SCFSW joints are investigated. The jo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Brazilian Society of Mechanical Sciences and Engineering
سال: 2018
ISSN: 1678-5878,1806-3691
DOI: 10.1007/s40430-018-1261-y