منابع مشابه
Study of microstructure and tensile properties of infrared-heat-treated cast-forged 6082 aluminum alloy
In this study, a cast rod is used as the material for the forging process (without extrusion). The cast forging process is used to ameliorate the coarse grains that form in the follow-up heating process of extrusion-forged materials. Infrared (IR) heating is also used for comparison with conventional heating processes. Experimental results show that the direct forging process (without extrusion...
متن کاملNew Applications of Forged Aluminum Suspension Arms
Automobiles are required to be even lighter for further achieving environmental protection through fuel economy improvement, as well as safety feature enhancement and drivability improvement. Automotive suspensions are also required to reduce their weight and thus more aluminum is being adopted. Aluminum forgings, in particular, are often applied because of their significant weight reduction ef...
متن کاملEffects of Carbon on the Microstructure and Hot Deformation Behavior
The effects of carbon content on the dynamic and static softening mechanisms of Ti microalloy steels were investigated both in ferrite and austenite regions. 
The results obtained showed that recrystallization rate decreased as the percentage of carbon content was increased from 0.0035 to 0.110. This is due to the Ti(CN) and TiC precipitates and also the free carbon content. In the ferrite r...
متن کاملEffects of Carbon on the Microstructure and Hot Deformation Behavior
The effects of carbon content on the dynamic and static softening mechanisms of Ti microalloy steels were investigated both in ferrite and austenite regions. The results obtained showed that recrystallization rate decreased as the percentage of carbon content was increased from 0.0035 to 0.110. This is due to the Ti(CN) and TiC precipitates and also the free carbon content. In the ferrite reg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1966
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.30.5_498