The mechanical behaviour of adhesively bonded composite joints under repeated axial impacts at different temperatures
نویسندگان
چکیده
منابع مشابه
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملThe Effects of Pre-bond Moisture on the Fracture Behaviour of Adhesively-bonded Composite Joints
The results of an investigation into the effects of pre-bond moisture absorbed by fibrecomposite substrates prior to bonding with various structural epoxy adhesives are presented. Substrates were bonded in the as-received condition (where substrates had been exposed to atmospheric moisture for periods of greater than three months) and were also bonded in the fully-dried condition (after drying ...
متن کاملComputational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملThe Fracture Behaviour of Adhesively-Bonded Composite Joints: Effects of Rate of Test and Mode of Loading
The present paper discusses the results of an investigation into the effects of test rate and the mode of loading on the fracture energy, Gc, of adhesively-bonded fibre-composite joints. Various carbon-fibre reinforced-polymer (CFRP) matrix composite substrates have been bonded using two different types of automotive structural epoxy-adhesives. They have been tested via loading the bonded joint...
متن کاملModelling the Fracture Behaviour of Adhesively-bonded Joints as a Function of Test Rate
Tapered-double cantilever-beam joints were manufactured from aluminium-alloy substrates bonded together using a single-part, rubber-toughened, epoxy adhesive. The mode I fracture behaviour of the joints was investigated as a function of loading rate by conducting a series of tests at crosshead speeds ranging from 3.33 x10 m/s to 13.5 m/s. Unstable, (i.e. stick-slip crack) growth behaviour was o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Engineering of Composite Materials
سال: 2017
ISSN: 2191-0359,0792-1233
DOI: 10.1515/secm-2015-0509