The linear thermal expansion coefficient of Inconel 617 alloy

نویسندگان

چکیده

Abstract The experimental results of a study the thermal expansion Inconel 617 alloy in temperature range 293.15-1460 K are presented. An anomalous change coefficient at high temperatures was detected. initial data obtained with an error within 3%. approximation equations and table reference values for dependence volumetric properties obtained.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Corrosion behavior of dissimilar welded joint between Inconel 617 alloy and A387-Gr.11 low-alloy steel

In this study, Inconel 617 alloy was welded to A387-Gr.11 low-alloy steel using ER309L filler metal via gas tungsten arc welding (GTAW). First, the corrosion behavior of Inconel 617, A387-Gr, and the weld metal was evaluated by the Tafel polarization test and electrochemical impedance spectroscopy (EIS) in acidic (H2SO4), neutral (NaCl), and combined (H2SO4 + NaCl) solution at ambient temperatu...

متن کامل

Corrosion behavior of dissimilar welded joint between Inconel 617 alloy and A387-Gr.11 low-alloy steel

In this study, Inconel 617 alloy was welded to A387-Gr.11 low-alloy steel using ER309L filler metal via gas tungsten arc welding (GTAW). First, the corrosion behavior of Inconel 617, A387-Gr, and the weld metal was evaluated by the Tafel polarization test and electrochemical impedance spectroscopy (EIS) in acidic (H2SO4), neutral (NaCl), and combined (H2SO4 + NaCl) solution at ambient temperatu...

متن کامل

On the Determination of Thermal Expansion Coefficient of Thermal Oxide

The accurate value of thermal expansion coefficient ( ) of thin film is an important thermal property in the design of microelectronic devices and microsystem. This research presents a microbridge buckling deformation caused by the residual stresses to determine the of thermal oxide (SiO2) film. The extraction of is supported through experimental means and finite element analysis (FEM) of the b...

متن کامل

Temperature dependence of thermal expansion coefficient for palladium-based binary alloy.

Temperature dependencies of thermal expansion coefficients for the alloys of Pd-Ag, Pd-Cu and Pd-Co binary systems were measured at temperatures up to 900 degrees C, with heating and cooling rates of 5 degrees C/min. The coefficient of thermal expansion of alloys with no transformation in the temperature range of interest in porcelain firing was well approximated by a linear equation of tempera...

متن کامل

Thermal expansion coefficient of hydrogenated amorphous carbon

The coefficient of thermal expansion ~CTE! of hydrogenated amorphous carbon (a-C:H) was investigated as a function of the concentration of sp hybridization. The CTE, determined using the thermally induced bending technique, depends on the concentration of sp bonded carbon, increasing to the value of graphite as the sp concentration approaches 100%. By using a combination of the thermally induce...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Physics: Conference Series

سال: 2021

ISSN: ['1742-6588', '1742-6596']

DOI: https://doi.org/10.1088/1742-6596/2119/1/012136