The Kinetics of Static Recrystallization in Microalloyed Hypereutectoid Steels

Particle-Size-Grouping Model of Precipitation Kinetics in Microalloyed Steels

The formation, growth, and size distribution of precipitates greatly affects the microstructure and properties of microalloyed steels. The computational Particle-Size-Grouping (PSG) kinetic models were developed to simulate precipitate particle growth due to collision and diffusion mechanisms. Firstly, the standard PSG method for collision is clearly explained and verified. Then a new PSG metho...

Equilibrium Model of Precipitation in Microalloyed Steels

The formation of precipitates during thermal processing of microalloyed steels greatly influences their mechanical properties. Precipitation behavior varies with steel composition and temperature history and can lead to beneficial grain refinement or detrimental transverse surface cracks. This work presents an efficient computational model of equilibrium precipitation of oxides, sulfides, nitri...

Comments About the Strengthening Mechanisms in Commercial Microalloyed Steels and Reaction Kinetics on Tempering in Low-Alloy Steels

Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr

Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...

PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS

The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...