The investigation on the ideal spot weld numerical model in resistance welding
نویسندگان
چکیده
منابع مشابه
Design Parameters Selection and Optimization of Weld Zone Development in Resistance Spot Welding
This paper investigates the development of weld zone in Resistance Spot Welding (RSW) which focuses on weld nugget and Heat Affected Zone (HAZ). The effects of four factors namely weld current, weld time, electrode force and hold time were studied using a general 2 factorial design augmented by five centre points. The results of the analysis showed that all selected factors except hold time exh...
متن کاملQuality Evaluation and Automatic Classification in Resistance Spot Welding by Analyzing the Weld Image on Metal Bands by Computer Vision
This paper introduces a novel method for the quality evaluation of resistance spot welds. The evaluation is based on computer vision methods, which allow nondestructive on-line real-time processing. The input of the system is the image of a weld imprint on a metal band which covers the electrodes against wear and soiling. In order to find the position of the resistance spot welds, we describe a...
متن کاملNumerical Simulation of Nugget Geometry and Temperature Distribution in Resistance Spot Welding
Resistance spot welding is an important manufacturing process in the automotive industry for assembling bodies. The quality and strength of the welds and, by extension, the body is mainly defined by the quality of the weld nuggets. The most effective parameters in this process are sheet material, geometry of electrodes, electrode force, current intensity, welding time and sheet thickness. The p...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2020
ISSN: 0268-3768,1433-3015
DOI: 10.1007/s00170-020-06114-y