The Internal Creep Rupture Strength of Joints of Steel Tubes Welded with Dissimilar Metals
نویسندگان
چکیده
منابع مشابه
Cold End Forming Of Welded Steel Tubes
The production of custom and specific tube end shapes by cold end forming using a die is generally limited to seamless tubular parts. Current research work in the field follows the same trend as that of industry and, therefore, there is no accumulated experience, no practical design rules, and no information available in the specialized literature concerning the utilization of tube end forming ...
متن کاملEvaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
متن کاملCreep Deformation Measurement of 316H Stainless Steel Multi-pass Welded Joints using Digital Image Correlation
A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...
متن کاملThe Influence of Ultrasonic Impact Treatment on Fatigue Behaviour of Welded Joints in High-strength Steel
The unabated growth of the steel industry and progressively increasing operating loads on metal structures generate a need for a search for optimum engineering solutions to improve the loadcarrying capacity and reduce metal consumption. One way of resolving this problem is to utilise high-strength steels. It is common knowledge however that the improvement of the steel strength is accompanied b...
متن کاملCreep behavior and in-depth microstructural characterization of dissimilar joints
The 700 °C power plants currently under development will utilize Ni-base alloys such as alloy 617 for components to be operated at temperatures >650 °C. Due to economic reasons for components or parts of components which are subjected to temperatures <650 °C, 2% Cr or 9-12% Cr steels is used, depending on the required mechanical properties. This makes the dissimilar joining of Ni-base alloys an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1970
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.19.196