The influence of longitudinal reinforcement on shear capacity of reinforced concrete members without shear reinforcement

Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement

Shear Strength of Slender Reinforced Concrete Beams without Web Reinforcement

This paper attempt to predict the shear strength of high strength concrete beam with different shear span of depth ratio without web reinforcement. The large data base available has been clustered and a linear equation analysis has been performed . The prepared models are functions of compressive strength , percentage of flexural reinforcement and depth of beam. The proposed models have been va...

Influence of shear reinforcement corrosion on the performance of under-reinforced concrete beams

Reinforced concrete beams are normally designed as under-reinforced to provide ductile behaviour at failure i.e. the tensile moment of resistance, Mt(0), is less than the moment of resistance of the compressive zone, Mc. Since it is well established that the steel in reinforced concrete beams is prone to corrosion, the residual flexural strength is normally the main concern of asset managers. H...

Utilising confinement reinforcement for shear resistance in reinforced concrete structures

Common transverse reinforcement of reinforced concrete members with circular cross-section consists of round ties or spirals. Its purpose in members that are not subjected to significant shear loading is to provide proper confinement for concrete, and eliminate buckling of the longitudinal reinforcement bars. If spirals are to be used as both shear enabler and confiner for reinforced concrete b...

Experimental Investigation on Shear Cracking Behavior in Reinforced Concrete Beams with Shear Reinforcement

This paper presents an experimental investigation to clarify shear cracking behavior of reinforced concrete beams. The effects of the various influential parameters on the spacing between shear cracks and the relationship between shear crack width and stirrup strain at the intersection with shear cracks were carefully investigated. It was found that shear crack width proportionally increases wi...