The High Dynamics Readout of PMT for BGO Calorimeter
نویسندگان
چکیده
منابع مشابه
The CMS Electromagnetic Calorimeter Readout
CMS is a general-purpose detector designed for use in the large hadron collider (LHC) at CERN. The electromagnetic calorimeter will play an important role in electron and photon energy measurements. The benchmark process to evaluate and optimize its performance is H −→ γγ in the intermediate mass range (90 < mH < 150 GeV). For this purpose, each element of the readout chain has to be optimized....
متن کاملCalibration of the L3 BGO Calorimeter Using an RFQ Accelerator
An improved calibration technique based on a radio-frequency-quadrupole (RFQ) accelerator is presented. A high-intensity flux of 17.6 MeV photons, produced by radiative capture of 1.85 MeV protons from the RFQ in a lithium target, is used to calibrate 11000 crystals of the L3 BGO calorimeter. In this paper, we present results obtained for the calibration of 1997 and 1998 L3 data samples. For th...
متن کاملCsI Calorimeter and low power PMT base for KOTO experiment
KOTO is the first experiment in the world specialized in observing the decay KL → π0νν . The decay is sensitive to new physics scenarios beyond the Standard Model. The most important detector of KOTO is the CsI calorimeter, which measures positions and energies of gammas from KL, in order to reconstruct the vertexes of them. There are mainly three requirements for the calorimeter. First, dynami...
متن کاملCMS Calorimeter Trigger/Readout Electronics for SLHC
The SLHC will be a very challenging environment for physics and for the trigger and DAQ in particular. Expected pileup multiplicies on the level of 40-200 interactions every beam crossing will flood the detector with the “ambient noise” of many low pT particles. The impact of these low pT particles is particular large for the hadron calorimeter, which has a relatively large cell size (compared ...
متن کاملCalice Electromagnetic Calorimeter Readout Status
The CALICE Electromagnetic CALorimeter (ECAL) will be a silicon-tungsten sampling calorimeter [1] with 30 layers of silicon wafers, each containing an 18×18 array of diode pads, giving 9720 channels to be read out. The signal from each pad is amplified by a Very Front End (VFE) ASIC [2] which multiplexes the signals from 18 pads onto one output line. The silicon wafers and VFE chips are mounted...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2011
ISSN: 1742-6596
DOI: 10.1088/1742-6596/293/1/012013