The Four-Element MIMO Antenna Design with Low Mutual Coupling at 28 GHz for 5G Networks
نویسندگان
چکیده
in this contribution, a MIMO micro strip patch antenna with four radiating elements is designed3 at 28 GHz. The designed has very low isolation loss between elements. simulated using the CST Microwave simulator. measurement results are also shown paper. Both simulation and studied to analyze performance of antenna. features such as, return loss, VSWR, gain, beam-width radiation pattern analyzed center frequency investigated experimentally inter-element spacing 3 mm. envelope correlation coefficients among elements, mean effective gains, efficiencies discussed. planner, compact thin so it applicable for 5G handset.
منابع مشابه
Four-Element Dual-Band MIMO Antenna System for Mobile Phones
A dual-band multiple-input-multiple-output (MIMO) antenna system for LTE 700/2300/2500, UMTS2100, GSM 1800/1900 mobile phone applications is presented. The whole system consists of four identical 3-D IFAs (inverted F antenna) loaded with lumped inductors and folded on FR4 cuboids. Without any special designed decoupling structures, the measured isolation among antenna elements is higher than 13...
متن کاملLimited Size MIMO Antenna Systems and Mutual Coupling Challenge
The wireless communication high data rate is achievable by installing more than one antenna in receiver and transmitter terminals as MIMO antenna. In order to obtain the MIMO gain (Envelope Correlation Coefficient (ECC) ≤ 0.5), the antenna elements must be at least separated by a distance of 0.5λ (λ is the operating wavelength of 0.7~3.8 GHz which is the frequency range of most of the current w...
متن کاملAntenna Count for Massive MIMO: 1.9 GHz versus 60 GHz
If we assume line-of-sight propagation and perfect channel state information at the base station – consistent with slow moving terminals – then a direct performance comparison between single-cell Massive MIMO at PCS and mmWave frequency bands is straightforward and highly illuminating. Line-of-sight propagation is considered favorable for mmWave because of minimal attenuation, and its facilitat...
متن کاملConical Conformal Antenna Design using the CPM Method for MIMO Systems
Abstract- In this article, the design of conformal antennas has been discussed using the characteristic modes (CM) method. For this purpose, the vector wave function(VWF) has been utilized to achieve a two-dimensional mapping of the conformal antenna. In designing and analyzing of cone-shaped antennas applicable for multi-input multi-output (MIMO) systems, the most important goal is to achieve ...
متن کاملLow Mutual Coupling Wideband 1x2 Rectangular Slot Micro-Strip Antenna
A very simple approach for bandwidth enhancement, reducing the mutual coupling and return loss of 1x2 rectangular patches multiple inputs and multiple outputs (MIMO) antenna for Wi-Max operation is proposed. Resonate frequency of proposed antenna is 6.2GHz. For enhancing the bandwidth a simple rectangular slot has been used and bandwidth is enhanced from 3% to 13% at -11dB of return loss. For r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of engineering and advanced technology
سال: 2022
ISSN: ['2249-8958']
DOI: https://doi.org/10.35940/ijeat.d3457.0411422