The Evolution of Microstructure during Annealing of Al-Mg-Sc-Zr Alloy Deformed by Equal Channel Angular Pressing
نویسندگان
چکیده
منابع مشابه
Effect of Equal Channel Angular Pressing and Annealing Treatment on the Evolution of Microstructure in AlMg0.7Si Aluminum Alloy
In this research, samples of AlMg0.7Si aluminum alloy are deformed up to three passes using equal channel angular pressing (ECAP). Formation of a sub-micron structure after three passes of ECAP is demonstrated. Microstructural stability of the samples is investigated at temperatures of 300-500 °C. At 300 °C, fine recrystallized structure forms after 10 min which remains stable when the ...
متن کاملRe-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملMicrostructure and Texture Evolution of the Al-20Sn Alloy Processed by Equal-Channel Angular Pressing using RouteC
1Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior S/N, Cd. Universitaria, A.P. 70-360, Coyoacán, C.P. 04510, Mexico 2Laboratoire Procédés et Ingénierie en Mécanique et Matériaux, CNRS UMR 8006, ENSAM, 151, bd de Hôpital 75013, Paris, France 3Laboratorio de Microscopía Electrónica, Universidad Autónoma Metropolitana, Unidad Iztapalapa. San Ra...
متن کاملDissolution of the θ′ Precipitates in an Al-1.7at.%Cu Alloy Deformed by Equal-Channel Angular Pressing+
The microstructural evolution during the equal channel angular (ECA) pressing process of an α+ θ′ two-phase Al-1.7at.%Cu alloy has been studied by transmission electron microscopy (TEM) and energy-filtered transmission electron microscopy (EF-TEM). The θ′ precipitates are fragmented into fine particles after a few passes of ECA perssing. The θ′ precipitates are almost completely dissolved after...
متن کاملModeling and production of high strength Al strips by equal channel multi angular pressing method
Equal channel multi angular pressing (ECMAP) process is the efficient method to enhance the productivity of ultra-fine grained (UFG) materials, by increasing process continuity and as a result decreasing process required time. Comparing repetitive ECAP method, in the same period, the number of passes can be done by ECMAP. In this article, ECMAP of AL strips in two typical annealed and as receiv...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2018
ISSN: 1898-794X,0587-4246
DOI: 10.12693/aphyspola.134.895