The evaluation of flat and slant mode ductile crack growth for aluminum alloy 7 NO 1-T 6.
نویسندگان
چکیده
منابع مشابه
Study of the flat to slant crack transition in ductile thin sheet material: Simulations and experiments
1 Mines ParisTech, Centre des matériaux, CNRS UMR 7633, BP87 91003 Evry Cedex, France [email protected] Flat to slant crack transition can typically be observed in ductile thin sheet materials. The crack initiates perpendicularly to the loading direction from the notch and then turns to 45° with respect to the loading direction during crack propagation. This phenomenon is, how...
متن کاملCrack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions
The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...
متن کاملAccelerated Threshold Fatigue Crack Growth Effect – Powder Metallurgy Aluminum Alloy
Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...
متن کاملStress Ratio Effects on Crack Opening Loads and Crack Growth Rates in Aluminum Alloy 2024
Since its founding, NASA has been dedicated to the advancement of aeronautics and space science. The NASA Scientific and Technical Information (STI) Program Office plays a key part in helping NASA maintain this important role. The NASA STI Program Office is operated by Langley Research Center, the lead center for NASA's scientific and technical information. The NASA STI Program Office provides ...
متن کاملSimulation of Crack Growth in Ductile Materials
During crack growth of real materials, the total energy released can be partitioned into elastic and dissipative terms. By analyzing material models with mechanisms for dissipating energy and tracking all energy terms during crack growth, it is proposed that computer simulations of fracture can model crack growth by a total energy balance condition. One approach for developing fracture simulati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1986
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.52.1567