The Effects of Annealing after Equal Channel Angular Extrusion (Ecae) on Mechanical and Magnetic Properties of 49Fe-49Co-2V Alloy

Numerical Analysis of Az61 Magnesium Alloy Extrusion Process by Modified Equal Channel Angular Extrusion (ecae) Method

T. Bajor, M. Krakowiak, P. Szota, Czestochowa University of Technology, Czestochowa, Poland The paper presents the results of numerical modelling of AZ61 magnesium alloy hot deformation using modified ECAE method. The temperature-velocity conditions were analysed using FEM. The extrusion process was realised using the die with modified angular channel containing horizontal contracting zone in t...

investigating the effects of expansion equal channel angular extrusion (exp-ecae) on the dynamic behavior of aa7075 aluminum alloy

expansion equal channel angular extrusion (exp-ecae) is a severe plastic deformation (spd) operation for processing bulk materials. in the current study, aa7075 al was spd-processed by expansion equal channel angular extrusion (ex-ecae) at various temperatures and ram velocities. then, using split hopkinson pressure bar (shpb), the severely deformed products were compressed at room temperature ...

Microstructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets

Equal channel angular rolling (ECAR) is a severe  plastic deformation (SPD) technique which has been used to produce metal sheets with ultra-fine grain structure. In the present work, the relationships between the mechanical properties and microstructure of samples during the ECAR process have been investigated. The Rietveld method was applied to analyze the X-ray diffraction pattern and to det...

Effect of Equal Channel Angular Pressing and Annealing Treatment on the Evolution of Microstructure in AlMg0.7Si Aluminum Alloy

In this research, samples of AlMg0.7Si aluminum alloy are deformed up to three passes using equal channel angular pressing (ECAP). Formation of a sub-micron structure after three passes of ECAP is demonstrated. Microstructural stability of the samples is investigated at temperatures of 300-500 °C. At 300 °C, fine recrystallized structure forms after 10 min which remains stable when the ...

Quasi-Static and Dynamic Characterization of Equal Channel Angular Extrusion (ECAE) –Processed and Rolled AZ31 Magnesium Alloy Sheet