The dynamic process of laser drawing germanium core optical fiber
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولGlass-clad single-crystal germanium optical fiber.
Long lengths (250 meters) of a flexible 150 microm diameter glass-clad optical fiber containing a 15 microm diameter crystalline and phase-pure germanium core was fabricated using conventional optical fiber draw techniques. X-ray diffraction and spontaneous Raman scattering measurements showed the core to be very highly crystalline germanium with no observed secondary phases. Elemental analysis...
متن کاملSilica-clad crystalline germanium core optical fibers.
Silica-clad optical fibers comprising a core of crystalline germanium were drawn using a molten core technique. With respect to previous fibers drawn using a borosilicate cladding, the present fibers exhibit negligible oxygen despite being fabricated at more than twice the melting point of the germanium. The counterintuitive result of less oxygen when the fiber is drawn at a higher temperatures...
متن کاملOptical Fiber Drawing and Dopant Transport
Abstract. Optical fibers are made of glass with different refractive indices in the (inner) core and the (outer) cladding regions. The difference in refractive index arises due to a rapid transition in the concentration of a dopant across the boundary between these two regions. Fibers are normally drawn from a heated glass preform, and the different dopant concentrations in the two regions will...
متن کاملCapstan Speed Control in the Optical Fiber Drawing Process: A Case Study for Mechatronics
Industrial case studies of successful implementations of combined mechanical and closed-loop control design provide students with meaningful examples of classroom theory. Such a case study on the development of a capstan drive with feedback control for use in optical fiber production is presented in this paper. Optical fiber is manufactured by the draw process, heating and pulling high purity g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2017
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/844/1/012058