The durability of acetylated beech (Fagus sylvatica L.) laminated veneer lumber (LVL) against wood-destroying basidiomycetes
نویسندگان
چکیده
Abstract The overall aim of this study was to investigate the durability acetylated beech ( Fagus sylvatica L.) laminated veneer lumber (LVL) against wood-destroying basidiomycetes. secondary objective test whether specimen size affects mass loss and assessment wood-material under test. based on pre-standard prEN 113-3. Six materials (acetylated LVL, untreated solid wood, pine sapwood Pinus sylvestris L.), larch Larix decidua Mill.) 3-layer slab, wood) were tested using three geometry designs (50 × 25 15 mm 3 as well 50 19 with without sealed edges) Coniophora puteana , Rhodonia placenta Gloeophyllum trabeum Trametes versicolor Pleurotus ostreatus . made arithmetic mean median percentage (ML), relative ML x -values), decay susceptibility index (DSI). It found that affected by fungus, material, design, latter being most essential factor in study. In addition, parameter had a significant effect classification. Furthermore, small differences resulted different classes (DC) some cases, whereas large did not. However, LVL always considerably durable (DC 1) all fungi independent design method.
منابع مشابه
Studies on European beech (Fagus sylvatica L
Colour parameters of European beech were measured using CIELab system. 103 logs from 87 trees in 9 sites were cut into boards to study the variations of wood colour parameters. Both site and tree effect on colour were observed. Patterns of red heartwood occurrence were defined. When excepting red heartwood there was still a highly significant effect of site and tree; differences remained after ...
متن کاملMechanical Properties Analysis and Reliability Assessment of Laminated Veneer Lumber (lvl) Having Different Patterns of Assembly
Laminated Veneer Lumber (LVL) panels made from poplar (Populus ussuriensis Kom.) and birch (Betula platyphylla Suk.) veneers were tested for mechanical properties. The effects of the assembly pattern on the modulus of elasticity (MOE) and modulus of rupture (MOR) of the LVL with vertical load testing were investigated. Three analytical methods were used: composite material mechanics, computer s...
متن کاملApplication of Microwave Heating for Acetylation of Beech (Fagus sylvatica L.) and Poplar (Populus hybrids) Wood
Microwave and conventional acetylation of wood was carried out to determine its efficacy on the material properties. Beech (Fagus sylvatica L.) and poplar (Populus hybrids) samples with dimensions 14 mm × 14 mm × 14 mm were impregnated using acetic anhydride, and chemical reactions were initiated by microwave and conventional heating. The microwave acetylation process was carried out using labo...
متن کاملPredicting red heartwood formation in beech trees (Fagus sylvatica L.)
Beech-forests (Fagus sylvatica L.) represent the natural vegetation cover for the majority of sites in Germany. Although coniferous forests actually dominate, beech is the most important among the deciduous tree-species in Germany, when considering the area and the economics. While the wood of the younger beech normally shows a whitish colour (white beech), the timber of older beech may form co...
متن کاملThe Effects of Some Factors on the Impact Bending Strength of Laminated Veneer Lumber
In this study, the impact bending strengths and specific impact bending strengths were determined for solid wood and laminated veneer lumber (LVL) produced from eucalyptus (Eucalyptus grandis W. Hill ex Maiden), poplar (Populus x euramericana I-214), and beech (Fagus orientalis L.) woods using urea formaldehyde (UF), melamine urea formaldehyde (MUF), and phenol formaldehyde (PF) adhesives. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: European Journal of Wood and Wood Products
سال: 2023
ISSN: ['0018-3768', '1436-736X', '0018-3766']
DOI: https://doi.org/10.1007/s00107-023-01962-3