The Development of a Wrist Brace using 3D Scanner and 3D Printer
نویسندگان
چکیده
منابع مشابه
Making 3D Replicas Using a Flatbed Scanner and a 3D Printer
This paper describes a novel approach to making 3D replicas of nearly flat objects using a flatbed scanner and a 3D printer. The surface reconstruction is based on the fact that the light in a flatbed scanner shines under a given constant angle and the CCD sensor records different intensities depending on the angle between a local normal vector of a micro-facet and the vector towards the light ...
متن کاملDevelopment of a 3D printer using scanning projection stereolithography
We have developed a system for the rapid fabrication of low cost 3D devices and systems in the laboratory with micro-scale features yet cm-scale objects. Our system is inspired by maskless lithography, where a digital micromirror device (DMD) is used to project patterns with resolution up to 10 µm onto a layer of photoresist. Large area objects can be fabricated by stitching projected images ov...
متن کامل3D Scanner using Kinect
In this report, we describe, justify and assess the quality of our design for a 3D scanner using Microsoft Kinect. A 3D model of an object can be obtained by taking both color and depth images from different viewpoints. We developed a streamline and a novel combination algorithm for this task. In the process, we had to solve problems involving noise, miss-alignment between color and depth, comb...
متن کاملUse of a 3D printer to create a bolus for patients undergoing tele-radiotherapy
Background: This study describes the possibility of implementing three-dimensional printing technology to create a precise construction of a planned bolus, based on computed tomography information stored in the Digital Imaging and Communications in Medicine (DICOM) format file. Materials and Methods: To create the bolus with a 3D printer, we converted data in the DICOM format to the s...
متن کاملmetrics for the detection of changed buildings in 3d old vector maps using als data (case study: isfahan city)
هدف از این تحقیق، ارزیابی و بهبود متریک های موجود جهت تایید صحت نقشه های قدیمی سه بعدی برداری با استفاده از ابر نقطه حاصل از لیزر اسکن جدید شهر اصفهان می باشد . بنابراین ابر نقطه حاصل از لیزر اسکنر با چگالی حدودا سه نقطه در هر متر مربع جهت شناسایی عوارض تغییر کرده در نقشه های قدیمی سه بعدی استفاده شده است. تمرکز ما در این تحقیق بر روی ساختمان به عنوان یکی از اصلی ترین عارضه های شهری می باشد. من...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fashion & Textile Research Journal
سال: 2017
ISSN: 1229-2060,2287-5743
DOI: 10.5805/sfti.2017.19.3.312