The Corrosion Resistance of Al Film on AZ31 Magnesium Alloys by Magnetron Sputtering
نویسندگان
چکیده
Nano Al films were prepared on AZ31 magnesium alloy samples by DC magnetron sputtering. The effects of sputtering power the microstructure and corrosion resistance film investigated. results show that surface aluminum is dense polycrystalline state, it oriented along (111) crystal plane. grain size first increases then decreases with increase power. When exceeds 100 W, there no insignificant effect orientation crystals current density are reduced two orders magnitude. sputtered varies Compared low power, high has most excellent resistance, but too will lead to micro cracks film, which adversely affect resistance.
منابع مشابه
Corrosion Resistance of Cerium-Conversion Coated AZ31 Magnesium Alloys in Cerium Nitrate Solutions
Cerium conversion coatings are a potential alternative to chromium conversion coatings for improving the corrosion resistance of magnesium alloys. This study detailed the microstructure and corrosion resistance of cerium conversion coatings on AZ31 magnesium plates treated in 0.05 kmolm 3 cerium nitrate solution, with and without 0.25 kmolm 3 hydrogen peroxide. The results indicate that the cor...
متن کاملCorrelation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys
* Corresponding author. Tel: 34 1 3944348; Fax: 34 1 3944357 E-mail: [email protected] ABSTRACT X-ray photoelectron spectroscopy (XPS) was used in order to investigate the correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys exposed to 98% relative humidity at 50oC. Commercially pure magnesium, used as the reference material, reveale...
متن کاملPreparation of Hydroxyapatite/Tannic Acid Coating to Enhance the Corrosion Resistance and Cytocompatibility of AZ31 Magnesium Alloys
Hydroxyapatite/tannic acid coating (HA/TA) were prepared on AZ31 magnesium alloys (AZ31) via chemical conversion and biomimetic methods. The characterization and properties of the coating were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), corrosion testing, MC3T3-E1 cell proliferation assay, and MC3T3-E1 cell morphology o...
متن کاملThe Effect of Substrate on Structural and Electrical Properties of Cu3N Thin Film by DC Reactive Magnetron Sputtering
The aim of this paper is to study the effect of substrate on the Cu3N thin films. At first Cu3N thin films are prepared using DC magnetron sputtering system. Then structural properties, surface roughness, and electrical resistance are studied using X-ray diffraction (XRD), the atomic force microscope (AFM) and four-point probe techniques respectively. Finally, the results are investigated and c...
متن کاملFilm thickness distribution in magnetron sputtering
Of crucial importance to the thin film process engineer is an understanding of the parameters which affect the film thickness distributions which may be obtained from magnetron sources. This paper describes how variations in source design, target erosion and source-to-substrate distance affect observed uniformities from a magnetron source. A simple method of simulating magnetron sources using t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2021
ISSN: ['2075-4701']
DOI: https://doi.org/10.3390/met11101522