The constitutive equations of fiber reinforced metal matrix composites.
نویسندگان
چکیده
منابع مشابه
Casting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملPrediction of the Thermomechanical Behavior ofParticle-Reinforced Metal Matrix Composites
The objective of this paper was to predict the thermomechanical behavior of 2080 aluminum alloy reinforced with SiC particles using the Mori–Tanaka theory combined with the finite element method. The influences of particle volume fraction, stiffness, aspect ratio and orientation were examined in terms of effective Young’s modulus, Poisson’s ratio and coefficient of thermal expansion (CTE) of th...
متن کاملMatrix cracking of fiber-reinforced ceramic composites in shear
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under shear loading. To this end, we develop a model based on potential energy differences upstream and downstream of a fully bridged steady-state mat...
متن کاملConstitutive modeling of fiber composites with a soft hyperelastic matrix
This paper presents an experimental and numerical study of unidirectional carbon fiber composites with a silicone matrix, loaded transversally to the fibers. The experiments show nonlinear behavior with significant strain softening under cyclic loading. The numerical study uses a plane-strain finite element continuum model of the composite material in which the fiber distribution is based on ex...
متن کاملFracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal
سال: 1987
ISSN: 0913-185X
DOI: 10.1299/jsme1987.30.37