The chemical resistance of nano-sized SiC rich composite coating
نویسندگان
چکیده
منابع مشابه
EFFECT OF NANO SiC ADDITIVE ON MCMB-SiC COMPOSITE FABRICATION VIA MOLTEN SILICON INFILTRATION
C-SiC composites with carbon-based mesocarbon microbeads (MCMB) preforms are new type of highpreformance and high-temperature structural materials for aerospace applications. In this study MCMB-SiC composites with high density (2.41 g.cm-3) and high bending strength (210 MPa,) was prepared by cold isostatic press of mixed mesophase carbon powder derived from mesophase pitch with different amoun...
متن کاملبررسی سختی و مقاومت به خوردگی پوشش های کامپوزیتی Ni-Co/SiC تقویت شده با میکرو و نانو ذرات SiC
Composite and nanocomposite Ni-Co/SiC coatings were synthesized by electro-codeposition of micro and nano-sized SiC particles with average diameter of 10m and 20nm using horizontal electrodes. Surface morphology, chemical composition, phase composition, hardness and corrosion resistance of the deposited coatings were studied using SEM observations and EDX, XRD, microhardness and polarization ...
متن کاملA carbon nanotube-enhanced SiC coating for the oxidation protection of C/C composite materials
A carbon nanotube-enhanced SiC (CNT-SiC) coating was deposited on C/C composites to improve the oxidation resistance of C/C. The CNT-SiC coating was prepared by direct growth of CNTs on C/C surface at 700oC followed by deposition of SiC using chemical vapor deposition at 1150oC for 1 hour. SiC was deposited on the CNTs as well as the interface between CNTs and C/C, making CNTs strongly rooted o...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite
In this study, molybdenum-copper/alumina nano composite was synthesized with mechano-chemical method using high energy planetary ball milling. The molybdenum oxide, copper oxide and aluminum powder were used as starting materials and reaction appeared to occur through a rapid combustion reaction process. The evaluation of powder particles after different milling times was studied by X-ray diffr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Coatings Technology
سال: 2015
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2014.11.032